how is it possible to route traffic through another network class and all http traffic

installed cent OS on one PC with 2 network cards

 eth0 and eth1
eth0 = 192.168.0.244
eth1 =s 10.0.0.1 
gateway to access the net is 192.168.0.254

In order that the 10.X network range  can access the internet i added the a route
# route add -net 10.0.0.0 netmask 255.0.0.0 gw 192.168.0.254 but this didnt work so i deleted the same
 

My resolv.conf file looks like this

search linuxbox.com
nameserver 203.199.113.44
nameserver 203.199.113.27
 

So i change the following in vi /etc/sysctl.conf

# Controls IP packet forwarding
net.ipv4.ip_forward = 1

vi /proc/sys/net/ipv4/ip_forward

1

nedd to start iptables 

and need to add the following rules 

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT

or you can use the command --- system-config-securitylevel enable http and https

here is is my sample conf file of iptables

########################################################################

# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -i eth1 -j ACCEPT
-A RH-Firewall-1-INPUT -i eth0 -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p 50 -j ACCEPT
-A RH-Firewall-1-INPUT -p 51 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 23 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
*mangle
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A PREROUTING -i eth1 -j MARK --set-mark 0x9
-A PREROUTING -i eth0 -j MARK --set-mark 0x9
COMMIT
*nat
:PREROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING -m mark --mark 0x9 -j MASQUERADE
COMMIT
############################################################

Hope this helps you out

now you should be able to ping google.com :-)

--